Zone2 Surround - Denon AVC-A1XV Operating Instructions Manual

ZONE2 Surround

• When ZONE2 is used with a 5.1- or 7.1-channel system, various surround modes can be selected according to the program source being played.
• The desired sound field can be achieved by adjusting the parameters for the various surround modes.
1 Select the ZONE2 mode using the AMP/Z2 button.
(Remote control unit)
2 Select the surround mode.
q Dolby Digital and DTS surround
mode.
(Remote control unit) (Remote control unit)
The surround mode switches in the following order each time the DSP
SIMULATION button is pressed:
WIDE SCREEN
VIRTUAL MATRIX
e STEREO mode.
(Remote control unit) (Remote control unit)
See pages 124, 135~139, 142 for a description of the features of the
various surround modes.
NOTE:
• The following surround modes can be selected in ZONE2: STEREO,
DOLBY/DTS SURROUND, 5/7CH STEREO, WIDE SCREEN, SUPER
STADIUM, ROCK ARENA, JAZZ CLUB, CLASSIC CONCERT, MONO
MOVIE, VIDEO GAME, MATRIX and VIRTUAL.
3 Press the SURROUND PARAMETER button.
Display the Surround Parameter menu.
(Remote control unit)
q Select the various parameters.
4
CH SEL
ENTER
(Remote control unit)
5
CH SEL
or
ENTER
(Remote control unit)
w DSP surround simulation mode.
(Remote control unit)
SUPER STADIUM ROCK ARENA
VIDEO GAME MONO MOVIE
r 5CH/7CH STEREO mode.
(Remote control unit)
Press the ENTER or SURROUND PARAMETER button to complete the setting.
(Remote control unit)
JAZZ CLUB
CLASSIC CONCERT
(Remote control unit)
CH SEL
ENTER
(Remote control unit)
1
2-
q
2- w
RC-995
w Adjust the parameter settings.
2
2- e
2- r
4
5
3,5
157