Check Of The Measurement Result - Denon AVC-A1XVA Operating Instructions Manual

V

. Check of the measurement result

• The results of the measured items can be checked.
For instructions on checking the equalizer parameters, see pages 46 ~ 48.
1
(Main unit) (Remote control unit)
2
(Main unit) (Remote control unit)
[Speaker Config. Check]
3
(Main unit) (Remote control unit)
4
(Main unit) (Remote control unit)
Select the items.
The measurement results of each item can be
checked here.
* A u t o S e t u p
S p C o n f i g . C h e c k
Press the ENTER button and display the verification screen.
Press the ENTER button to switch to the second screen.
NOTE:
• When measurements have been made using the measurement microphone, speakers
with a built-in filter such as subwoofers might be set with a value that differs from the
physical distance because of the internal electrical delay.
[Delay Time Check]
If the check ends, press the ENTER button again.
Select whether or not to save the data you have
checked.
Select the following items
measurement results.
Store : Set with the checked measurement value.
Cancel : If you do not want to set the contents
you have checked, cancel the auto setup
settings.
* A u t o S e t u p
S t o r e
[Channel Level Check]
based on the
[Crossover Freq. Check]
41