5-1. Setting the 2ch Direct/Stereo
• Set this when you want to change the speaker settings when the surround mode is set to the 2-channel Direct or Stereo mode.
1
(Main unit)
2
Display the 2ch Direct / Stereo screen.
(Main unit)
* 2 c h D R C T / S T
S e t t i n g B a s i c
3
(Main unit)
4
q Select the setting.
5
(Main unit)
2 Setting the front B speakers when the surround mode is set to the 2-channel
Direct or Stereo
When "Adv+Front B" is selected at "7-2. Power Amp Assign" and "Custom" is selected at this
setting, the "Front B" setting is displayed.
• To play signals from the Front B speaker when in the 2-channel Direct or Stereo mode, set
"Used".
74
Select "2ch Direct / Stereo" at the Advanced Playback
menu.
CH SEL
ENTER
(Remote control unit)
CH SEL
ENTER
(Remote control unit)
Select "Custom".
CH SEL
ENTER
(Remote control unit)
CH SEL
ENTER
(Main unit)
(Remote control unit)
Enter the setting.
The Advanced Playback menu reappears.
CH SEL
ENTER
(Remote control unit)
* A d v a n c e d P l a y
2 c h D R C T / S T
Example: This screen is displayed in function of the settings made at "2-1. Speaker
Configuration", "2-2. Subwoofer Setup", "2-3. Delay Time" and "2-4. Crossover
Frequency".
* 2 c h D R C T / S T
S e t t i n g C u s t o m
w Select the parameter.
CH SEL
ENTER
(Main unit)
(Remote control unit)