Denon AVC-A1XV Operating Instructions Manual page 49

4 Once "Meters" or "Feet" is selected in step 3, the
Delay Time screen appears automatically.
* D e l a y T i m e
F L
5
(Main unit) (Remote control unit)
6
(Main unit) (Remote control unit)
If "Yes" is selected for "Default", the settings are automatically reset to the default values.
When "Step" is selected, you can select the unit of "0.1 m (1 ft)" or "0.01 m (0.1 ft)".
Please note that the difference of distance for every speaker should be 6.0 m (20 ft) or less. If
you set an invalid distance, a CAUTION notice, such as screen right will appear. In this case,
please relocate the blinking speaker(s) so that its distance is no larger than the value shown in
highlighted line.
7
(Main unit) (Remote control unit)
: 3 . 6 0 m
Select the speaker to be set.
The picture of the speaker selected blinks.
CH SEL
ENTER
Set the distance between the center speaker and listening position.
The distance changes in units of 0.03 meters (0.1 foot) or 0.3 meters (1 foot) each time the
button is pressed. Select the value closest to the measured distance.
CH SEL
ENTER
Enter the setting.
The Speaker Setup menu reappears.
CH SEL
ENTER
The AVC-A1XV automatically sets the optimum
surround delay time for the listening room.
Example: When the distance is set to 3.6 m
for the center speaker
49