Version Check Mode - Denon PMA-50 Service Manual

1. Version Check mode

1.1. Operation
･Hold down buttons "SOURCE" and "Bluetooth" and press the power button to turn on the power.
･
Mode,
Version Display Display / LED check
pressed.
1.2. The contents of the display
Version check mode 1.
Version check mode 2.
2. Display / LED check mode
2.1. Operation
･Hold down buttons "SOURCE" and "Bluetooth" and press the power button to turn on the power.
･Press the "SOURCE" button.
･ Mode,
Version Display Display / LED check
pressed.
2.2. The contents of the display
･The Protect LED is lit.
･The DISPLAY are all lit.
Mode and
Protection History
"SYS_:xx.xx_"
"FPGA:xxxx _ _ " (FPGA version)
"USB_:xx.xx _ " (USB DSP version)
"REGION : rr __ "
"NFC:ttt___"
xx.xx：Version information
rr : Region
For reference:
" E2 " (EU、Auto Standby : Default On)
" _ _ " (Other Regions、 Auto Standby : Default Off)
ttt : NFC Detect test information
"BT:vvvvvvvv "
"aa:aa:aa _ _ _ " (BT(MAC) address , continue to line3)
"aa:aa:aa _ _ _ " (BT(MAC) address)
"RGXYZ:_xxxxx "
"yyyyy_zzzzz"
vvvvvvvv：Version information
aa:aa:aa:aa:aa:aa：BT(MAC) address
xxxxx：G-Sensor: X Axis
yyyyy：G-Sensor: Y Axis
zzzzz：G-Sensor: Z Axis)
Mode and
Protection History
21
Mode changes each time the button "Source" is
(System μcom version)
(Region)
(NFC Detect Test)
(Bluetooth version)
(Acceleration sensor)
(Acceleration sensor)
Mode changes each time the button "Source" is