Denon AVC-A1XV Operating Instructions Manual page 28

5. Advanced Playback
2ch The speaker settings can be changed specifically for playing in the 2-
1
Direct/Stereo channel direct or stereo mode.
Dolby Digital Turn the audio compression on or off when down-mixing Dolby
2
Setup Digital signals.
Auto Surround
3
Set the Auto surround mode function.
Mode
Manual EQ This parameter is for optimizing the Room EQ with which the audio
4
Setup signals are produced from the speakers.
6. Zone Setup
The components of the signals output from the various speakers and
the frequency response can be set automatically inside the set by
Speaker
1
inputting the existence/absence of combinations of speakers and
Configuration
their size (corresponding to their low frequency playback capability)
for the speakers used in ZONE2 during surround playback in ZONE2.
Subwoofer This selects the subwoofer used in ZONE2 for playing the low base
2
Mode sound.
This parameter is for optimizing the timing of the sound produced
3
Delay Time from the various speakers and subwoofer according to the listening
position in ZONE2.
This adjusts the volume of the signal output from the various
4
Channel Level
speakers and subwoofer used in ZONE2.
Crossover Set the frequency (in Hz) below which deep bass appearing in the
5
Frequency main channels will be routed to the ZONE2 subwoofer.
Video
Convert
Mode
6
Video Setup
Audio Delay
Zone3/4 Adjust the tone and channel level of the sound output
7
Tone/Ch.Lev. from ZONE3 and ZONE4.
7. Option Setup
The number of channels that you wish to play back in each zone are
1
Channel Setup
assigned to each zone accordingly.
Power Amp Power Amplifiers can be assigned to the various channels according
2
Assign to your system's requirements.
This sets the volume level of each zone output.
Volume Limit:
Power On Level: This sets the volume level upon
Volume
3
Control
Mute Level:
Volume Level:
This sets the Trigger Out output for the different input
Trigger Out sources.
4
Setup If "Zone=Main" is selected, settings can be made for
the individual surround modes.
AC Outlet
5
This sets the AC outlet to on or off for the different input sources.
Assign
User
Memory
Setup
6
Memory/Lock
Setup
Lock
28
Advanced Playback
Zone Setup
Set the input signal to be output from the ZONE2
monitor out terminal.
Set the delay time the sound is synchronized with the
picture which are outputted in ZONE2.
Option Setup
This sets the upper limit for the
master volume.
switching on the power of each
zone.
This sets the amount of attenuation
of the audio output when each
zone is muted.
This sets whether the output level
of ZONE2 to 4 is fixed or variable.
This stores the current user settings in the memory.
This sets whether or not to lock the system setup
settings so that thay cannot be changed.
Auto Surround Mode = ON
All Channels and Frequency=0dB
Front Sp. Center Sp.
Small Small
Front L & R Center
3.6 m (12 ft) 3.6 m (12 ft)
Front L Front R
0.0 dB 0.0 dB
Zone3 Bass = 0 dB, Treble = 0 dB, HPF = OFF, L/R = 0 dB
Zone4 Bass = 0 dB, Treble = 0 dB, HPF = OFF, L/R = 0 dB
Main Zone Zone2
9.1 CH 5.1 CH
L1 L2 L3 L4
FL C SLA SLB
Main Vol.Limit = OFF, P. On Lev. = LAST, Mute Lev. = FULL
Zone2 Vol.Lev. = VAR, Vol.Limit = OFF, P. On Lev. = LAST, Mute Lev. = FULL
Zone3 Vol.Lev. = VAR, Vol.Limit = OFF, P. On Lev. = LAST, Mute Lev. = FULL
Zone4 Vol.Lev. = VAR, Vol.Limit = OFF, P. On Lev. = LAST, Mute Lev. = FULL
ZONE = MAIN, All Surround Modes = ON
Trigger CDR/
TUNER PHONO CD DVD
Out 1 TAPE
OFF OFF OFF OFF ON
Trigger CDR/
TUNER PHONO CD DVD
Out 2 TAPE
ON ON ON ON ON
Trigger CDR/
TUNER PHONO CD DVD
Out 3 TAPE
ON ON ON ON ON
Trigger CDR/
TUNER PHONO CD DVD
Out 4 TAPE
ON ON ON ON ON
CDR/
TUNER PHONO CD DVD
TAPE
ON ON ON ON ON
Default settings
Basic
OFF
Default settings
Subwoofer Surround Sp.
Yes Small
LFE
Subwoofer Surround L & R
3.6 m (12 ft) 3.0 m (10 ft)
Center Surround L Surround R
0.0 dB 0.0 dB 0.0 dB
80 Hz
AUTO
0 ms
Default settings
Zone3 Zone4
Stereo Stereo
Normal
L5 R1 R2 R3 R4
SBL FR – SRA SRB
VDP TV DBS VCR-1 VCR-2 VCR-3
ON ON ON ON ON ON
ZONE = 2
VDP TV DBS VCR-1 VCR-2 VCR-3
ON ON ON ON ON ON
ZONE = 3
VDP TV DBS VCR-1 VCR-2 VCR-3
ON ON ON ON ON ON
ZONE = 4
VDP TV DBS VCR-1 VCR-2 VCR-3
ON ON ON ON ON ON
ZONE = MAIN
VDP TV DBS VCR-1 VCR-2 VCR-3
ON ON ON ON ON ON
–
Setup Lock = OFF
Page
74
75
76
77~79
Page
81
82
83, 84
Subwoofer
85, 86
0.0 dB
87
88, 89
89
90, 91
Page
92~95
R5 96~100
SBR
101, 102
VCR-4 V.AUX
ON ON
VCR-4 V.AUX
ON ON
102, 103
VCR-4 V.AUX
ON ON
VCR-4 V.AUX
ON ON
VCR-4 V.AUX 104
ON ON
105, 106
106, 107