Denon AVC-A1XV Operating Instructions Manual page 27

2. Speaker Setup
Speaker Setup
Input the combination of speakers in your system and their
Speaker corresponding sizes (SMALL for regular speakers, LARGE for full-
1
Configuration size, full-range) to automatically set the composition of the signals
output from the speakers and the frequency response.
Subwoofer
2
This selects the subwoofer for playing deep bass signals.
Setup
This parameter is for optimizing the timing with which the audio
3
Delay Time signals are produced from the speakers and subwoofer according to
the listening position.
This adjusts the volume of the signals output from the speakers and
4
Channel Level subwoofer for the different channels in order to obtain optimum
effects.
Crossover Set the frequency (Hz) below which the bass sound of the various
5
Frequency speakers is to be output from the subwoofer.
Use this function when using multiple surround speaker
combinations for more ideal surround sound. Once the
Surround combinations of surround speakers to be used for the
6
Speaker Setup different surround modes are preset, the surround
speakers are selected automatically according to the
surround mode.
Boundary Gain
compensation
THX Audio
7
Setup
Surround Back
Speaker Position
3. Audio Input Setup
Audio Input Setup
Digital In This assigns the digital input jacks for the different input
1
Assign sources.
2
EXT.IN Setup Set the Ext.In terminal playback method.
Input Function The playback level is corrected individually for the different input
3
Lev. sources.
Function The names of the different input source can be changed as desired
4
Rename and displayed on the display.
IEEE1394 The connected IEEE1394 device can be automatically identified to
5
Assign assign the input source.
IEEE1394 Set the function for associating playback of the connected IEEE1394
6
Auto Func. device on or off.
4. Video Setup
Component In This assigns the color difference (component) video input jacks for
1
Assign the different input sources.
Video Convert
2
Set the input signal to be output from the monitor output terminal.
Mode
Make the settings related to video output (resolution and aspect rate
3
Video Scaler
conversion).
This setting sets the action detection sensitivity of the 3-dimensional
3D Y/C
4
Y/C separation at the time of the video signal up-conversion to S-
Separation
Video.
The HDMI or DVI input terminals are assigned for the different input
HDMI/DVI In sources.
5
Assign Select HDMI or DVI for the monitor output terminal.
Select the HDMI audio signal playback method.
6
Audio Delay Set the audio delay timing to synchronize the sound and video.
This sets whether or not to display the on-screen display that
On Screen
7
appears on the monitor screen when the controls on the remote
Display
control unit or main unit are operated.
When using a THX Ultra2 compatible subwoofer,
set the subwoofer's frequency response.
When using two surround back speakers, set
the distance of the two speakers.
Video Setup
Front Sp. Center Sp.
Small Small
Front L & R Center
3.6 m (12 ft) 3.6 m (12 ft)
Surround
Front L Front R Center
L (A)
0 dB 0 dB 0 dB 0 dB
THX/DOLBY/ THX/DOLBY/
Surround THX/DOLBY
DTS DTS
mode
CINEMA MUSIC
Surround
A A
speaker
The Distance Between SBL/SBR = 0 m to 0.3 m
Input
CD DVD VDP TV
source
Digital COAX COAX COAX COAX
Inputs 1 2 3 4
EXT.IN-1 Mode = DSP, Surr.B = NOT USED, S.Back = NOT USED,
Setup SW Level = +15 dB, Input ATT. = OFF
EXT.IN-2
Mode = DSP, SW Level = +15 dB, Input ATT. = OFF
Setup
CDR/
TUNER PHONO CD
TAPE
0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB
CDR/
TUNER PHONO CD
TAPE
DVD VDP TV
1-RCA 2-RCA 3-RCA
Aspect = FULL, Resolution = 480i / 576i
DVD VDP TV
NONE NONE NONE
Function/Mode = ON, Master Volume = ON, Mode = Mode 1
Default settings
Surround Sp.
Subwoofer
A / B
Yes Small
LFE —THX—
Surround Surround
Subwoofer
L & R (A) L & R (B)
3.6 m (12 ft) 3.0 m (10 ft) 3.0 m (10 ft)
Surround Surround Surround Surround Surround
R (A) L (B) R (B) Back L
0 dB
0 dB 0 dB 0 dB
FIXED —THX—
WIDE 9 CH DSP
GAME SCREEN STEREO SIMULATION
A A+B A+B A+B
THX Ultra2 Subwoofer = NO
Default settings
CDR/
DBS VCR-1 VCR-2 VCR-3 VCR-4
TAPE
COAX
OPT 1 OPT 2 OPT 3 OPT 4 OPT 5
5
DVD VDP TV DBS VCR-1 VCR-2 VCR-3
0 dB 0 dB 0 dB 0 dB
DVD VDP TV DBS VCR-1 VCR-2 VCR-3 VCR-4 V.AUX
–
Auto Function = OFF
Default settings
DBS VCR-1 VCR-2 VCR-3
4-RCA 5-RCA 6-BNC NONE
AUTO
Motion Detection = MID
DBS VCR-1 VCR-2 VCR-3
NONE NONE NONE NONE
0 ms
Page
Surround Back
Sp.
46, 47
Small / 2spkrs
47, 48
Surround
Back
48, 49
3.0 m (10 ft)
Subwoofer
Back R
50, 51
0 dB
0 dB
52, 53
MULTI CH
MODE
54
A
55
56
Page
V.AUX TUNER
57, 58
OPT 6 OFF
59, 60
VCR-4 V.AUX
61
0 dB 0 dB
62, 63
64
65
Page
VCR-4 V.AUX
66, 67
NONE NONE
67, 68
68, 69
69
VCR-4 V.AUX
70, 71
NONE NONE
71, 72
72, 73
27