Setting The On Screen Display (Osd) - Denon AVC-A1XV Operating Instructions Manual

3
(Main unit)
4
(Main unit)
NOTES:
• The audio delay setting does not apply when playing in the EXT. IN mode or in the analog input direct mode or stereo mode (only when
the crossover frequency is set to "FIXED–THX–" or front speaker is set to "Large").
• By default, this menu is not displayed when no digital signals are being input.

4-7. Setting the On Screen Display (OSD)

• Use this to turn the on-screen display (messages other than the menu screens) on or off.
• Sets the on-screen display's display mode.
1
(Main unit)
2
(Main unit)
3
q Select the item to be set.
Function/Mode Status :
Set whether or not to turn on the on-screen display of the input source name and input mode when an input source is selected.
Master Volume Status :
Set whether or not to turn on the on-screen display of the main volume level when the main volume is operated.
Display Mode :
Mode 1 : Prevents flickering of the on-screen display when there is no video signal.
Mode 2 : Flickering is not prevented.
Use this mode if the on-screen display does not appear in the Mode 1, as may happen according to the TV being used.
72
Set the delay time. (0 ms ~ 200 ms)
With a movie source, for example, adjust so that the movement of the actors' lips is
CH SEL
ENTER
synchronized with the sound.
(Remote control unit)
Enter the setting.
The Video Setup menu reappears.
CH SEL
ENTER
(Remote control unit)
Select "On Screen Display" at the Video Setup
menu.
CH SEL
ENTER
(Remote control unit)
Display the On Screen Display screen.
CH SEL
ENTER
(Remote control unit)
CH SEL
ENTER
(Main unit) (Remote control unit)
* V i d e o S e t u p
O n S c r e e n
* O n S c r e e n
F u n c / M o d e : O N
w Select the parameter.
CH SEL
ENTER
(Main unit) (Remote control unit)