Setting The Type Of Speakers For Zone2 - Denon AVC-A1XV Operating Instructions Manual

6-1. Setting the type of speakers for ZONE2

• The composition of the signals output to each channels and the frequency response are adjusted automatically according to the combination of
speakers actually being used in ZONE2.
1
(Main unit) (Remote control unit)
2
(Main unit) (Remote control unit)
3
(Main unit) (Remote control unit)
(Main unit) (Remote control unit)
4
(Main unit) (Remote control unit)
Select "Speaker Config." at the Zone Setup menu.
CH SEL
ENTER
Display the Speaker Config. screen as below.
CH SEL
ENTER
Set whether speakers are connected or not in ZONE2 and their size parameters.
Select the speakers connected in ZONE2 and the size parameters.
q Select the speaker.
CH SEL
ENTER
w Select the parameter.
For a description of the different parameters,
CH SEL
ENTER
see page 47.
Enter the setting.
The Zone Setup menu reappears.
CH SEL
ENTER
* Z o n e S e t u p
Z 2 S p C o n f i g .
* Z 2 S p C o n f i g .
F r o n t : S m a l l
ZONE2 Center Sp.
ZONE2 Front Sp.
ZONE2 Subwoofer
ZONE2 Surround Sp.
*
(ZONE2 Surround back Sp.)
*
This is only displayed when "7.1ch" is
selected for the ZONE2 channel output
setting at "7-1. Channel Setup". (See
pages 92~95)
81