After Completing System Setup - Denon AVC-A1XV Operating Instructions Manual

6
(Main unit)
CH SEL
ENTER
(Remote control unit) (Remote control unit)
System setup is complete. Once these settings are made, there is no need to change them unless different AV components are
connected or the speakers are repositioned.

After completing system setup

This button can be pressed at any time during the system setup process to complete the process.
1
(Main unit) (Remote control unit)
(Main unit)
CH SEL
ENTER
(Remote control unit) (Remote control unit)
2 On-screen display for component video outputs
• When viewing component video signals via the AVC-A1XV, the on-screen display is only displayed on the monitor when the "System Setup"
and "Surround Parameter" operations are performed and when the Remote control unit's ON SCREEN button is operated.
• When only component video signals are input to the AVC-A1XV or when "Component" is selected at the "Video Convert Mode settings", the
characters of the on-screen display are not displayed over the picture.
Select "Exit" and press the ENTER button to finalize the setting and exit the Option Setup mode.
When the setup lock function is activated, the settings listed below cannot be changed, and
"Setup Locked" is displayed when related buttons are operated.
• System setup settings
• Surround parameter settings
• Tone control settings
• Channel level settings (including test tones)
(Main unit)
• RoomEQ
To unlock, press the System Setup button again and
display the Setup Lock screen, then select "OFF"
CH SEL
ENTER
and press the ENTER button.
* O p t i o n S e t u p
E x i t
Press the SYSTEM SETUP button at the System Setup Menu, or select "Exit" and press the
ENTER button.
The changed settings are entered and the on-screen display turns off.
(Main unit)
* S y s t e m S e t u p
E x i t
CH SEL
ENTER
107