Setting The Channel Level For Zone2 - Denon AVC-A1XV Operating Instructions Manual

6-4. Setting the Channel Level for ZONE2

• Use this setting to adjust so that the playback level between the different channels of ZONE2 is equal.
• From the ZONE2 listening position, listen to the test tones produced from the speakers used in ZONE2 to adjust the level.
• The level can also be adjusted directly from the Remote control unit. (For details, see pages 154, 155.)
1
(Main unit) (Remote control unit)
2
(Main unit) (Remote control unit)
3
(Main unit) (Remote control unit)
4
(Main unit) (Remote control unit)
5
(Main unit) (Remote control unit)
Select "Channel Level" at the Zone Setup menu.
CH SEL
ENTER
Display the Channel Level screen.
CH SEL
ENTER
Select the mode.
Select "Auto" or "Manual".
CH SEL
ENTER
Auto :
Adjust the level while listening to the test tones
produced automatically from each speaker.
Manual :
Select the speaker from which you want to
produce the test tone to adjust the level.
Select "Test Tone Start".
CH SEL
ENTER
Select "Yes".
CH SEL
ENTER
* Z o n e S e t u p
Z 2 C h a n n e l L e v .
* Z 2 C h a n n e l L e v
T . T o n e : A u t o
* Z 2 C h a n n e l L e v
T . T o n e : A u t o
* Z 2 C h a n n e l L e v
T o n e S t a r t : Y e s
Example: When the "Auto" mode is selected
85