Copy And Scan Problems - Xerox VersaLink C405/N User Manual

Troubleshooting

Copy and Scan Problems

If the copy or scan quality is poor, refer to the following table.
Symptoms
Lines or streaks only present in copies made
from the document feeder.
Spots present in copies taken from the
document glass.
Image is too light or too dark.
Colors are inaccurate.
If the problem persists, for online support information, go to www.xerox.com/office/VLC405support.
212 Xerox VersaLink
®
User Guide
Solutions
There is debris on the CVT glass or the second-side scanning lens
assembly. When scanning, the paper from the document feeder
passes over the debris on the glass surfaces, resulting in lines and
streaks. Clean all glass surfaces with a lint-free cloth. For details,
refer to
There is debris on the document glass. When scanning, the debris
creates a spot on the image. Clean all glass surfaces with a
lint-free cloth.
Adjust the lighten/darken setting.
• Adjust color settings and confirm that the correct Original
• Perform the Scan Color Consistency procedure. For details,
C405 Color Multifunction Printer
®
Cleaning the Scanner
Type is set.
refer to Color Registration
on page 159.
on page 172.