Copy And Scan Problems - Xerox VersaLink C70 Series User Manual

Troubleshooting

Copy and Scan Problems

If the copy or scan quality is poor, refer to the following table.
Symptoms
Lines or streaks only present in copies made from the
document feeder.
Spots present in copies taken from the document
glass.
Image is too light or too dark.
Image quality is poor when scanning color original
documents.
Colors are inaccurate.
If the problem persists, for online support information, go to www.xerox.com/office/VLC70XXsupport.
274 Xerox ® VersaLink
User Guide
® C70XX Color Multifunction Printer
Solutions
There is debris on the CVT glass. When scanning, the
paper from the document feeder passes over the
debris on the glass surfaces, resulting in lines and
streaks. Clean all glass surfaces with a lint-free cloth
dampened with water. For details, refer to
the Scanner.
There is debris on the document glass. When
scanning, the debris creates a spot on the image.
Clean all glass surfaces with a lint-free cloth
dampened with water.
Adjust the lighten/darken setting.
For best results, select Black & White output.
Adjust color settings and confirm that the correct
Original Type is set.
Perform the Scan Color Consistency procedure. For
details, refer to Color Registration.
Cleaning