Features - BSS Audio FDS366T OMNIDRIVE User Manual

5.0

Features

Individual keys to select input and output channels for editing.
Crossover slopes of 6,12, 18, 24 or 48dB per octave.
Filter types:Butterworth, Bessel, Linkwitz-Riley and WHISEWORKS-
NTM*.
Comprehensive output limiters on each band (mid-filter).
Equalisers and 'dynamic' equalisers on each input and output.
High resolution input and output delays up to 2.6 seconds in
approximately 11 microsecond steps.
Input LED metering, showing signals from -12dB to clip level, and SIG.
Output LED metering, showing signals from -20dB to +6dB over limit
threshold, and SIG.
Front panel output level trims and mutes.
Polarity reverse on each output.
Phase adjustment for each crossover point, and phase compensation
defeat.
PC card port for storage and recall of program settings
Electronically balanced inputs and outputs with transformer output
option.
MIDI, RS-232, RS-485 and program change ports on rear panel.
96kHz sample rate and 24bit encoding/decoding for audio excellence.
AES/EBU digital input for direct digital feeds into Omnidrive.
Alignment Assistant for setting up cabinet driver alignments.
Comprehensive system security with control lock out, programmable
'Owner' and 'OEM' locks, and 'Safe' mode available for complete
system lock out.
Temperature based delay correction.
If you are familiar with the FDS-355 Omnidrive then look at the extra benefits
that the FDS-366T brings, an extra output channel, dynamic equalisation,
Thiele crossover shape and 96kHz audio quality to start with!
* The words "WHISEWORKS", "Neville Thiele Method" and NTM logotype are
trademarks of Precision Audio Pty. Ltd (registration pending). Manufactured
under license from Precision Audio Pty. Ltd. International Patents Pending.
- 12 -
FDS-366T