Connecting the power supply
Connecting the car battery
When using the transceiver as a mobile unit, connect the DC power supply cable to the
car battery.
Cautions
z Use the transceiver in a car with a negative ground system where the minus (−) pole of the battery
is connected to the car body.
z Check the car battery specification is 12 V. Do not connect the transceiver to the 24 V battery of a
large vehicle.
z Do not use the cigarette lighter socket inside the car as a power source.
Plug into the connector of the main body power cable until it clicks.
Main body rear panel
Connecting the external power supply equipment
When using the transceiver as a fixed station, use an external power source.
Cautions
z Use an external power source capable of supplying DC 13.8 V, a current capacity of 20 A or more.
z Make sure to switch OFF the power of the external power source before connecting.
Main body rear panel
Power cable
(DC 13.8 V)
Power cable
(DC 13.8 V)
Fuse holder
Red
DC 12 V battery
Fuse holder
Black
DC power supply
cable (supplied)
Red
AC power
outlet
DC power supply
cable (supplied)
Black
Direct current
power supply
23