Table of Contents
Advertisement
Antenna Installation
To attach the supplied an-
tenna to the FTA-250L, grasp
t h e b a s e o f t h e a n t e n n a
firmly, and exert a moderate
"pinching" pressure on the
base as you press the an-
tenna onto the transceiver's
antenna connector. While
exerting this pressure, rotate
the antenna clockwise 1/4
turn to lock the antenna in
place.
Installing the Battery Pack
1. Insert the battery pack into the battery compart-
ment on the back of the transceiver (À).
2. Push the battery in until the battery latch on the
lower back side of the transceiver clicks securely
(Á).
10
B
y
B
efore
ou
egIn
Removing the Battery Pack
1. Turn the transceiver OFF.
2. While sliding the latch in
the direction of the arrow,
as shown in the illustration.
3. Pull out the battery pack
from the transceiver.
Battery Charging
It is necessary to charge the Lithium-ion battery fully
before its first use. Follow the procedure below:
1. Install the Lithium-ion battery pack onto the trans-
ceiver. Ensure that the transceiver is switched off.
2. Insert the cable plug of the SAD-20 AC Adapter
into the DC IN jack located on the back of the
SBH-22 Charger Cradle, then plug the SAD-20
into the AC line outlet.
3. Insert the transceiver into the SBH-22 Charger
Cradle.
If the transceiver is inserted correctly, the RED
indicator on the SBH-22 will glow.
You may insert the cable plug of the SDD-
12 Cigarette Lighter DC/DC Converter into
the EXT/DC jack located on the right side
of the transceiver. In this case, the "
icon will appear in the top right corner of the
LCD display for trickle charging.
FTA-250L O
perATing
"
M
AnuAL
Hide quick links:
Advertisement
Table of Contents
