Specifying Settings For The Information Indicated In The Report For Ip Relay Transmissions (Mode 368) - Konica Minolta bizhub 362 User Manual

Specifying management settings
Specifying settings for the information indicated in the report for IP relay
transmissions (mode 368)
Specify whether or not the results of IP relay transmissions are indicated in
the reception report.
Settings at time of purchase
Bit
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected.
Bit
7
6
5, 4, 3, 2
1
0
362/350/282/250/222/200
7 6 5 4 3 2 1 0
1 1 0 0 0 0 1 0 (HEX: C2)
Description Setting
-------------------------- 1
Specifies the valid 1
range of administrator
passwords.
*Regardless of the set-
ting specified for this
bit, this machine is set
to normally require the
administrator pass-
word with the machine
and with PageScope
Web Connection.
-------------------------- 0000
Specifies whether or 0
not the results of scan
1
transmissions are indi-
cated in the transmis-
sion report.
Specifies whether or 0
not the results of IP re-
1
lay transmissions are
indicated in the recep-
tion report.
Description
*Do not change this bit
when specifying settings
for this function.
The administrator pass-
word is required with this
machine and with Page-
Scope Web Connection.
*Do not change these bits
when specifying setting for
this function.
Not indicated
Indicated
Not indicated
Indicated
7
Page Refer-
ence
----------
----------
----------
----------
----------
7-23