4.1 Arranging the Space ..................................6 4.2 Connect to Power ..................................6 4.3 Connect with the Gravity ................................6 4.4 Moving the Atmosphere ................................6 SERVICE AND SUPPORT ........................7 ATMOSPHERE EC DECLARATION OF CONFORMITY ..............8 3D Systems, Inc. p/n 74-D003, Rev. A...
3D Systems may (but shall not be obligated to) make improvements to this document from time to time. However, the Licensed User acknowledges that at any time after the expiration of the date of issuance, 3D Systems may institute a periodic charge or fee payable by the Licensed User in return for ongoing receipt of improvements.
Atmosphere system. Safety Symbols and Definitions The following are safety symbols that are common to 3D Systems guides. Some or all of these symbols may appear in this guide and/or in other Atmosphere documentation. CAUTION: Indicates the possibility of loss of data or damage to equipment.
The reason for this is to ensure that no unexpected incidents occur which could cause physical harm to the individual or damage the equipment. 3D Systems, Inc. p/n 74-D003, Rev. A...
Nominal 500 W • The Atmosphere should be connected to a separate fuse from the Gravity. Ethernet Connectivity RJ-45 Ethernet Sound Emission 50 dB(A) Machine Control The Gravity Ventilation Well ventilated with free flowing air. 3D Systems, Inc. p/n 74-D003, Rev. A...
IMPORTANT!: The hose must at all times allow for free flow through it. Please pay attention so that the hose is never compressed or folded. 4.4 Moving the Atmosphere Please contact 3D Systems Support if you want to move the equipment. 3D Systems, Inc. p/n 74-D003, Rev. A...
How to Reach 3D Systems You can learn more about 3D Systems’ warranty, service, updates, and other support by visiting our customer support site at https://support.3dsystems.com. You may also directly contact 3D Systems using the numbers or email addresses below:...