How To Use This Manual - Datalogic Lynx Instruction Manual

HOW TO USE THIS MANUAL

To make system connections see par. 1.3.
You can configure the LYNX™ reader in the following ways:
•
reading the programming barcode symbols in this manual
configuration commands and their relative arguments are read individually using
the symbols in this manual. See chapter 2, Appendix B and Appendix C.
•
using the Lynx™ Configuration Tools software utility
programming the reader is accomplished by selecting configuration commands or
printing them through a user-friendly graphical interface running on the PC. These
commands are sent to the reader over the current communication interface; or
they can be printed to be read. Install the Datalogic VisualSetup program from the
CD-ROM provided.
•
For information on how to use the device read chapter 1.
•
Explanations for some of the more complex barcode reading parameters
are given next to the relative parameter in chapter 2.
Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
CONNECTIONS
CONFIGURATION
DESCRIPTIONS
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France
ix