Table of Contents
Advertisement
Video operations
Setting the output method for scenes (system mode)
There are two methods of outputting a scene: PGM/PST mode and dual mode.
The scene output method is determined by the system mode.
PGM/PST mode
(factory settings)
In this mode, you select the scene (preset scene) to be used next for
program output, after which the program scene switches according
to the take operation.
You can add mix and wipe effects that are applied when switching
between scenes.
Preset scene
Preset scene
Dual mode
In this mode, use the left-right monitors to respectively select the
scene to output for programs 1 and 2. You can output two different
scenes at the same time.
Scene switching is always performed as a freeze-frame cut.
Program 1 scene
Program 1 scene
Changing the system mode
1.
From the [SETUP] button, touch <System Mode> in the
<System> tab.
2.
Touch the screen to select either "PGM/PST" or "Dual".
10
Program scene
Program scene
Program 2 scene
Program 2 scene
The target operations for the buttons and knobs change according
to the system mode, as follows.
Button/knob operation
[CUT]
[AUTO]
[AUTO TRANSITION]
(auto transition function)
[MIX] [WIPE]
[TIME]
SCENE/BANK [1]–[8]
[BANK]
[OUTPUT FADE]
[DSK]
(*1) Operates both programs 1 and 2 at the same time (common
setting).
(*2) Only touch operations on the multi-view PGM 2 screen are
available for program 2.
PGM/PST
Dual
µ
–
µ
–
µ
µ
(Always ON)
µ
–
(Freeze-frame cut)
µ
µ
(*1)
µ
Program 1 (*2)
µ
Program 1 (*2)
µ
Program 1 (*2)
µ
Program 1 only
Advertisement
Table of Contents
