Light Fixture Installation - Casablanca Vita Owner's Manual

liGht fixture installation

SWitCH HouSing HaRdWaRE (not to scale)
(2) Light Fixture Fitter
Screws
(3) Light Fixture
Light Fixture Light Fixture (2) 50-watt Halogen glass Shade
to Motor Housing
Fitter downlight Bulbs
Screws
Light Fixture assembly installation
Step 10a. Hold the light fixture up to the motor. Feed the wires
through the center hole and align the light fixture holes with
the holes in the center of the motor as shown in Figure #1.
notE: When handling the light fixture, be careful not to bend or
damage the antenna wire that has been installed around the light
fixture.
Step 10b. Partially insert the three light fixture screws into the
screw holes and tighten all three screws using the screwdriver
as shown in Figure #1.
Step 10c. Remove the porcelain wire nuts from the wires and
set aside for use in the next step.
Step 10d. Install two light fixture fitter screws halfway as
shown in Figure #2.
Step 10e. Plug in the Antenna wire as as shown in Figures
#2 and #3.
Step 10f. using the two porcelain wire nuts, connect the
BLaCk and WHitE wires from the fan to the BLaCk and
WHitE wires from light fixture fitter. Connect BLaCk to
BLaCk and WHitE to WHitE.
Step 10g. Place the key holes in the light fixture fitter, over
Figure #1
the partially installed screws in the light fixture. Rotate the
light fixture fitter counterclockwise until the screws are
firmly situated in the narrow end of the key holes. With the
screwdriver provided, tighten the screws securely, making
sure that the wires do not get pinched.
PLUG IN
ANTENNA WIRE
LIGHT FIXTURE
FITTER SCREWS
PORCELAIN
WIRE NUTS
LIGHT FIXTURE
ANTENNA
FITTER
WIRE
Figure #3
Figure #2
10