Lag Screw Installation (Required); Canopy Installation - Casablanca Vita Owner's Manual

notE: this step is required only under two conditions:
If the fan weighs 36 lbs. or more or if the existing ceiling
fixture outlet box needs to be modified for a ceiling
fan application (for example, if the house is not new
construction and you are replacing an existing light
fixture). We recommend that the ceiling box be of
sufficient capacity to support the weight of the fan and
light fixture under any conditions. If in doubt whether
you need to install the lag screw, consult a qualified
electrician.
Step 2. With the large washer attached, pass the lag
screw through the center hole of the crossbar mounting
bracket and screw into the guide hole. tighten until
the outlet box is mounted firmly to the beam. This box
must be secured to the ceiling firmly.
CanoPy HaRdWaRE (not to scale)
Canopy Hatch
Canopy
Step 3. Attach the canopy to the crossbar mounting
bracket with three of the 8-32 x 2
and lock washers provided with your Casablanca fan.
tighten using the provided screwdriver until snug
against the ceiling.
notE: on sloped ceilings, align the canopy opening
with the top or peak of the room.
laG screw installation

canopY installation

Canopy Screws and (4) Lock Washers
1
/ " long canopy screws
2
V
CANOPY
CANOPY SCREWS
™
ita
Phillips
Screwdriver
CANOPY
HATCH
LOCK WASHERS
5