Light Fixture Installation (Optional) - Casablanca C19xxxK Owner's Manual

Step 12d. Plug the male Molex plug into the female
Molex plug, aligning color and letters.
NOTE: The Molex plug will only connect if the letters
and colors are matched on both plugs. Do not force
the plug together.

LIGHT FIXTURE INSTALLATION (OPTIONAL)

Step 13. If you have purchased a Heritage™ II compatible light fixture for your fan (KGC10W, KGC12W, or
KGC19W), you will need to prep your fan for this installation. Continue using these instructions until otherwise
noted. If you are not installing a light kit, skip to step 14.
Step 13a. Remove the plug from the switch
housing. Figure #1.
Step 13b. Remove the Cut wire sleeves for the
included light switch and unscrew the knurl nut.
Figure #2.
Heritage II
MOLEX
PLUG
Figure #4
Figure #1
KNURL NUT
CUT WIRE
SLEEVES
Figure #2
TM
15