Optional Light Fixture Installation - Casablanca 19 Century Owner's Manual

SWITCH HOUSING CUP INSTALLATION
note: If you have purchased the exclusive accessory
light fixture for this fan, please go to Step 16. If
not please continue with Step 15.
Step 15. Slide the switch housing cup
over the threaded pipe from the switch
housing. Assure that no wires are
pinched.
Secure the cup to the fan with the
finial.
Tighten securely by hand only.
SWITCH HOUSINg
CUP

OPTIONAL LIGHT FIXTURE INSTALLATION

Step 16. Remove the wire nuts on the BLACK
and WHITE wires from the fan. If necessary
remove the insulation from the last
wire (fan and light fixture).
Step 17. Attach the switch housing wires to
the light fixture wires by placing the bare ends
of the wires together and then securing with a
wire nut. Connect in this order:
• WHITE wire from fan to WHITE wire from
light fixture. Secure with wire nut.
• BLACK wire from fan to BLACK wire from
light fixture. Secure with wire nut.
Inspect each wire nut and ensure that no bare
wire is visible; pull on each wire to test the
connection is mechanically sound.
0
" of each
1 /
2
THREADED
PIPE
FINIAL
WIRE
NUT