Casablanca Vita Owner's Manual page 14

w-63 upliGht and downliGht operation
Light operation
Your W-63 control allows for the separate or combined control of the uplight and
downlight.
Choosing the Light Control Sequence
1. Press the lIGHt button.
2.the light icon will come on and right next to it will either be:
– For controlling the uplight only
up
– For controlling the downlight only
dn
up
– For controlling both the uplight and the downlight at the same time.
dn
3. leaving the lIGHt button on, press and hold the REVERSE button for
at least 3 seconds until the light graphic changes. Press and hold the
REVERSE button until the desired light control is shown.
Controlling Both Lights at the Same time
1. Make sure you have the
not, repeat the steps under "choosing the light control
sequence."
2. turn the light off, then press and hold the lIGHt button.
After 2 seconds, the lights will both come on at the lowest
setting and gradually become brighter.
3. Release the lIGHt button when the desired brightness
is reached.
Controlling the uplight only
1. Make sure you have the uP icon next to the bulb icon.If
not repeat the steps under "choosing the light Control
Sequence."
2. turn the light off, then press and hold the lIGHt button.
After 2 seconds, the down light will come on at the lowest
setting and gradually become brighter.
3. Release the lIGHt button when the desired brightness
is reached.
Controlling the downlight only
1. Make sure you have the dn icon next to the bulb icon. If
not repeat the steps under "Choosing the light Control
Sequence."
2. turn the light off, then press and hold the lIGHt button.
After 2 seconds, the downlight will come on at the lowest
setting and gradually become brighter.
3. Release the lIGHt button when the desired brightness
is reached.
For all Light Sequences
1. the fan will remember at which sequence you last
set the light function. Every time the lIGHt button is
pushed on, the light's brightness and the last sequence
will come on.
2. The light's control will go through a "Safe Exit" program
when you push the lIGHt button onCE. the light will
increase slightly and then will gradually decrease until
it turns off. this will take approximately 20 seconds.
3. to turn the light off immediately, push the lIGHt button
two times rapidly.
14
up icon next to the bulb icon. If