Fan Installation; Getting Started; Crossbar Mounting Bracket Installation - Casablanca Vita Owner's Manual

Hide thumbs

Table of Contents

installing a new Ceiling Fixture outlet Box

If you do not have an existing fixture located where

you wish to place your Casablanca fan, an approved

ceiling fixture outlet box must be installed and wired.

WaRning!

To reduce the risk of fire, electrical shock,

or personal injury, mount to outlet box

marked "acceptable Fan Support of 22.7

kg (50 lbs.) or less" using the mounting

hardware provided with the outlet box.

crossBar MountinG Bracket installation

CEiLing HaRdWaRE (not to scale)

Crossbar Mounting Bracket

note: After removing the old fixture, check the outlet

box to ensure that it is supported by a joist or beam

across its upper surface. If not, a 2 x 4 stud must be

installed.

Step 1a. Remove the knockout plug in the center of

the outlet box or drill a

-inch hole for the lag screw

to pass through. then drill a

the joist or beam to a depth of 3 inches.

Step 1b. Route the outlet box wires through the

keyhole slot of the crossbar mounting bracket as

shown. Attach the crossbar mounting bracket to the

outlet box with the screws provided, making sure the

outlet box wires are not pinched by the washer.

Caution:

to reduce the risk of personal injury, use

only the mounting hardware provided

with the approved outlet box to install the

crossbar mounting bracket.

WaRning!

Support directly to building structure only.