Casablanca Vita Owner's Manual page 7

Step 4e. once set screw has been set, mount the
hanging adapter cover to the top of the fan. locate
the three mounting tabs and screw holes as shown
in Figure #1.
Step 4f. Slide the hanging adapter cover down
over the motor mounting tabs. Align the holes in the
hanging adapter cover with the holes in the mounting
tabs (the holes will only align one way) as shown in
Figures #2 and #3. Secure the hanging adapter cover
to the fan with the three screws.
SCREW
HOLE
MOUNTING
TAB
Figure #2
install Lightbulbs:
Step 5a. Install the six lightbulbs for the uplight as
shown in Figure #4.
notE: When replacing these lightbulbs, be sure to
use only 15-watt maximum.
fan preparation - continued
(6) 15-watt
uplight Bulbs
V
™
ita
SCREW HOLES
(3)
POLE COVER
MOUNTING TABS
(3)
Figure #1
Figure #3
6 LIGHTBULBS
Figure #4
7