Table of Contents
Advertisement
Pull-chain switches on the fan control the fan and reverse.
Using the fan control pull-chain switch: Fan off at start.
First pull: fan ON, low speed
Second pull: medium speed
Third pull: high speed
Fourth pull: fan OFF
Direction of blade rotation is controlled by the reverse
pull-chain on the side of the switch housing. No changes
in household wiring are required.
3-SPEED • OPTIONAL LIGHT FIXTURE INSTALLATION
NOTE: If a separate circuit is used to control the lights from a
wall control, the BLUE D1-Option wire in the canopy should be
connected to that switch leg with the BLACK fan power wire.
1. Refer to light kit instructions to assemble and attach your
light kit correctly.
2. Remove the two 8-32 screws from the switch housing cap.
3. Remove the plug from switch housing.
4. Install pull-chain switch and finger tighten collar on
switch.
5. Connect one wire from pull-chain switch to the BLUE D1-
Option wire. Secure splice with a wire nut.
6. Connect other wire from pull-chain switch to BLACK wire
from light kit. Secure splice with a wire nut.
7. Connect WHITE wire from switch housing to WHITE wire
from the light kit. Secure splice with a wire nut.
8. At the canopy, connect the BLACK and BLUE wires.
10
3-SPEED • OPERATION
PERFORMANCE AND ENERGY INFORMATION
Fan Speed
Low
Med
High
* Measured according to the ENERGY STAR
Ceiling fan airfl ow is measured in cubic feet per minute (CFM). Power use is measured in
watts. To maximize energy savings,
• Choose a fan with high airfl ow effi ciency (CFM/watt).
®
• Use ENERGY STAR
-labeled lighting in your fan.
• Remember to switch off your fan when you leave the room.
4743040 AT0907
Reverse
Pull-chain
Optional Light
Pull-chain Switch
Switch
Housing
Light
Fixture
Airfl ow
Power Use
(CFM)*
(watts)
1864
10
4117
33
7126
82
®
-approved Solid State test method.
Fan & Speed
Control Pull-chain
Switch
Remove Plug
Collar
Blue D-1
Option
Wire
Airfl ow Effi ciency (CFM/
watt)
185
125
87
Advertisement
Table of Contents
