Blade Installation - Casablanca Vita Owner's Manual

BLadE HaRdWaRE (not to scale)
Blades (5)

Blade installation

Step 9a. Before starting, locate the Casablanca logo
on the blade as shown in Figure #1. When installing
the blades on the fan, the logo needs to be facing
down so that it can be seen from the floor.
Figure #1
Step 9b. locate the blade slot on the side of the fan
as shown in Figure #2, then insert the blade into the
slot and align the holes in the blade with the holes
on the fan as shown in Figure #3.
Step 9c. using the blade screws and washers, mount
the five blades onto the fan as shown in Figure #4.
Caution:
Blade screws must be tightened securely
before operating the fan.
Blade installation
Blade Screws(16)
SCREW & WASHER
V
ita
Figure #2
BLADE
WASHER
Figure #3
™
Washers (16)
BLADE
BLADE SLOT
BLADE
SCREW
9