Light Fixture Installation - Casablanca MIDDLEBURY Owner's Manual

Hide thumbs

Table of Contents

SWITCH HOUSING HARDWARE (not to scale)

Light Assembly

Light Assembly Installation

Step 11a. Using the light assembly screws in Pack E and

the provided screwdriver, insert three screws into the light

assembly adapter plate, as shown and tighten by hand only.

Step 11b. Connect the light assembly connector to the

motor connector.

Step 11c. Carefully tuck in the wires and align the keyhole

slots in the light assembly with the three screws in the

adapter plate. Turn counterclockwise to align the keyhole

slots with the three screws.

Step 11d. Securely tighten all three screws by hand only

using the provided screwdriver.

Install Incandescent Lightbulbs

Step 12. Screw in two 60-watt type A15 medium base

lightbulbs.

NOTE: When replacing lightbulbs, be sure to use only

60-watt maximum.

Glass Installation

Step 13a. Remove the finial from the light assembly.

Step 13b. Insert the threaded rod from the light assembly

through the hole in the glass shade as shown.

Step 13c. Twist the finial onto the threaded rod. Tighten

securely.

CAUTION:

Overtightening the finial can cause the glass to

break.