Cisco TelePresence System Codec C40 Reference Manual page 205

Cisco TelePresence System Codec C40/C60
Contents Introduction
xStatus SystemUnit Diagnostics Message Level
Returns information on the level of the diagnostics message.
Error: There is an error in the system. The system can still be used, but there can be some
restrictions.
Warning: A problem is detected and a more specific report follows indicating the exact problem.
Critical: The warning level is critical. The system cannot be used.
Value space of the result returned:
<Error/Warning/Critical>
Example:
xStatus SystemUnit Diagnostics Message Level
*r Status (status=Error):
Reason: No match on address expression
XPath: Status/SystemUnit/Diagnostics/Message/Level
** end
xStatus SystemUnit Diagnostics Message Description
A description of the current diagnostics alerts.
Value space of the result returned:
<String>
Example:
xStatus SystemUnit Diagnostics Message Description
*s SystemUnit DiagnosticsResult Message 1 Description: "IP configuration
incomplete"
** end
xStatus SystemUnit Diagnostics Message References
Additional information on the diagnostics alert, if available.
Value space of the result returned:
<String>
Example:
xStatus SystemUnit Diagnostics Message References
*s SystemUnit DiagnosticsResult Message 1 References: ""
** end
D14642.15 Codec C40-C60 API Reference Guide TC7.0, JANUARY 2014.
About the API xConfiguration
xStatus SystemUnit Diagnostics ExtendedLogging Mode
205
xCommand
Indicates whether extended logging of diagnostics is turned on or off.
Value space of the result returned:
<On/Off>
Example:
xStatus SystemUnit Diagnostics ExtendedLogging Mode
*s SystemUnit Diagnostics ExtendedLogging Mode: Off
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.