Cisco TelePresence System Codec C40 Reference Manual page 136

Cisco TelePresence System Codec C40/C60
Contents Introduction
xCommand Video Layout SetPresentationView
Set the presentation view mode.
View: Select Default when you want the presentation to be viewed with the default settings for the
codec. Select Maximized when you want the presentation to be displayed in full screen. Select
Minimized when you want the presentation to be displayed in a small picture on screen.
Requires user role: ADMIN
Parameters:
View(r): <Default/Maximized/Minimized>
Example:
xCommand Video Layout SetPresentationView View:Default
OK
*r VideoLayoutSetPresentationViewResult (status=OK):
** end
xCommand Video Layout LoadDb
Loads and starts using the specified video layout database. The default video layout database is
initially provided by the system. The custom database is generated by the Cisco TC Console tool
and is made available to the codec from within the TC Console tool. The TC Console software
is found at the Developer Zone web page. Go to: http://developer.cisco.com/web/telepresence-
developer/tools/integrators/tc-console.
Custom: The system uses the custom video layout database which generated by the Cisco TC
Console tool.
CustomAutoModes: The system uses the auto mode part of the custom video layout database.
Default: The system use the default video layout database which is provided by the system.
Requires user role: ADMIN
Parameters:
Type(r): <Custom/CustomAutoModes/Default>
Example:
xCommand Video Layout LoadDb Type: Default
*r VideoLayoutLoadDbResult (status=OK):
** end
D14642.15 Codec C40-C60 API Reference Guide TC7.0, JANUARY 2014.
About the API xConfiguration
xCommand Video Layout Frame List
xCommand Video Layout List
136
xCommand xCommand
Lists the data related to all layout frames created by command 'xCommand Video Layout Frame
Add' for a specific layout identified by 'LayoutId'
Requires user role: ADMIN
Parameters:
LayoutId(o): <1..2147483647>
Example:
xCommand Video Layout Frame List LayoutId: 1
OK
*r VideoLayoutFrameListResult LayoutId 1 FrameId 1 PositionX: 0
*r VideoLayoutFrameListResult LayoutId 1 FrameId 1 PositionY: 0
*r VideoLayoutFrameListResult LayoutId 1 FrameId 1 Width: 10000
*r VideoLayoutFrameListResult LayoutId 1 FrameId 1 Height: 10000
*r VideoLayoutFrameListResult LayoutId 1 FrameId 1 Layer: 1
*r VideoLayoutFrameListResult LayoutId 1 FrameId 1 Border: Off
*r VideoLayoutFrameListResult LayoutId 1 FrameId 1 VideoSourceType:
localInput
*r VideoLayoutFrameListResult LayoutId 1 FrameId 1 VideoSourceId: 1
** end
Lists all identification numbers for layouts created by command 'xCommand Video Layout Add'.
Requires user role: ADMIN
Example:
xCommand Video Layout List
OK
*r VideoLayoutListResult LayoutId: 1
*r VideoLayoutListResult LayoutId: 3
** end
API Reference Guide
xStatus Appendices
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.