Cisco TelePresence System Codec C40 Reference Manual page 171

Cisco TelePresence System Codec C40/C60
Contents Introduction
xStatus ICE Turn Hostname
Returns the hostname, or IP address, that is configured as the TURN server.
Value space of the result returned:
<String>
Example:
xStatus ICE Turn Hostname
*s ICE Turn Hostname: "callway.medianetworkservices.com"
** end
xStatus ICE Turn Username
Returns the user name used for accessing the TURN server.
Value space of the result returned:
<String>
Example:
xStatus ICE Turn Username
*s ICE Turn Username: "username"
** end
xStatus ICE Call Result
Shows the state of the ICE routing in the present call.
Succeeded: The ICE routing is in use.
Failed: The ICE routing has failed.
Unsupported: ICE routing is not supported.
Mangled: ICE cannot route the media, because a server, such as VCS, is set to handle it.
Value space of the result returned:
<Succeeded/Failed/Unsupported/Mangled>
Example:
xStatus ICE Call Result
*s ICE Call 0 Result: "Unsupported"
** end
D14642.15 Codec C40-C60 API Reference Guide TC7.0, JANUARY 2014.
About the API xConfiguration
xStatus ICE Call Local Candidate
xStatus ICE Call Local IP
xStatus ICE Call Remote Candidate
171
xCommand
Returns the network interface type the local system is using to send media.
HOST: The endpoint sends media from its own IP address.
PRFLX: The endpoint sends media from its public IP address as seen by the remote Peer.
SRFLX: The endpoint sends media from its public IP address as seen by the TURN server.
RELAY: The endpoint sends media from the IP address and port allocated on the TURN server, and
is used as a fallback until ICE has concluded.
Value space of the result returned:
<HOST/PRFLX/SRLFX/RELAY>
Example:
xStatus ICE Call Local Candidate
*s ICE Call 1 Local Candidate: "HOST"
** end
Returns the IP address the local system is using for media routing in the present call.
Value space of the result returned:
<String>
Example:
xStatus ICE Call Local IP
*s ICE Call 1 Local IP: "192.0.1.20"
** end
Returns the network interface type the remote system is using to send media.
HOST: The far-end receives media on its own IP address.
PRFLX: The far-end receives media on its public IP address as seen by the remote Peer.
SRFLX: The far-end receives media on its public IP address as seen by the TURN server.
RELAY: The far-end receives media on the IP address and port allocated on the TURN server, and is
used as a fallback until ICE has concluded.
Value space of the result returned:
<HOST/PRFLX/SRFLX/RELAY>
Example:
xStatus ICE Call Remote Candidate
*s ICE Call 1 Remote Candidate: "SRFLX"
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.