Cisco TelePresence System Codec C40 Reference Manual page 70

Cisco TelePresence System Codec C40/C60
Contents Introduction
xConfiguration Video Input Source [1..3] Name
Enter a name for the video input source.
Requires user role: ADMIN
Value space: <S: 0, 50>
Format: String with a maximum of 50 characters.
Example: xConfiguration Video Input Source 1 Name: ""
xConfiguration Video Input Source [1] Connector
Select which video input connector to be active on video input source 1.
Requires user role: ADMIN
Value space: <HDMI>
HDMI: Select HDMI when you want to use the HDMI 1 as input source 1.
Example: xConfiguration Video Input Source 1 Connector: HDMI
Typical resolutions used for different optimal definition profiles, call rates and frame rates
Optimal
Frame
xConfiguration Video Input Source [2] Connector
Definition
rate
Profile
NOTE: Codec C40 has one DVI input (DVI-I 3). Codec C60 has two DVI inputs (DVI-I 2 and 3). 256 kbps 768 kbps
Select which video input connector to be active on video input source 2.
Normal 512 × 288 1024 × 576
Requires user role: ADMIN
30 fps Medium 640 × 360 1280 × 720
Value space: <HDMI/DVI> High 768 × 448 1280 × 720
HDMI: Select HDMI when you want to use the HDMI 2 as input source 2.
Normal 256 × 144 512 × 288
DVI: Select DVI-I when you want to use the DVI-I 2 as input source 2.
60 fps Medium 256 × 144 768 × 448
Example: xConfiguration Video Input Source 2 Connector: HDMI
High 512 × 288 1024 × 576
* The resolution will be 1920 × 1080 for 1080p60 capable C60 codecs (main board rev F and later).
xConfiguration Video Input Source [3] Connector
NOTE: Codec C40 has one DVI input (DVI-I 3). Codec C60 has two DVI inputs (in this context, use
DVI-I 3).
Select which video input connector to be active on video input source 3.
Requires user role: ADMIN
Value space: <DVI/Composite/YC>
DVI: Select DVI when you want to use the DVI-I 3 as input source 3.
Composite: Select Composite when you want to use the Composite as input source 3.
YC: Select YC when you want to use the S-Video (YC) as input source 3. Connect to the two
connectors marked Y/Comp and C.
Example: xConfiguration Video Input Source 3 Connector: DVI
D14642.15 Codec C40-C60 API Reference Guide TC7.0, JANUARY 2014.
About the API
Call rate
1152 kbps 1472 kbps 2560 kbps 4 Mbps
1280 × 720 1280 × 720 1920 × 1080 1920 × 1080 1920 × 1080
1280 × 720 1280 × 720 1920 × 1080 1920 × 1080 1920 × 1080
1280 × 720 1920 × 1080 1920 × 1080 1920 × 1080 1920 × 1080
768 × 448 1024 × 576 1280 × 720 1280 × 720 1280 × 720
1024 × 576 1024 × 576 1280 × 720 1280 × 720
1280 × 720 1280 × 720 1280 × 720 1280 × 720
*
xConfiguration xConfiguration xCommand
xConfiguration Video Input Source [1..3] Type
Set which type of input source is connected to the video input.
Requires user role: ADMIN
Value space: <other/camera/PC/DVD/document_camera>
Other: Select Other when some other type of equipment is connected to the selected video input.
Camera: Select Camera when you have a camera connected to the selected video input.
PC: Select PC when you have a PC connected to the selected video input.
DVD: Select DVD when you have a DVD player connected to the selected video input.
Document_Camera: Select Document_Camera when you have a document camera connected to
the selected video input.
Example: xConfiguration Video Input Source 1 Type: PC
xConfiguration Video Input Source [1..3] PresentationSelection
Define how the video system will behave when a presentation source is connected to the video
input. In general, any input source can be used as a presentation source; normally, the main camera
(self-view) will not be used as a presentation source. Note that sharing the presentation with the far
end always requires additional action (tap Start Presenting on the Touch screen control panel, or
6 Mbps
press the Presentation key on the remote control).
Requires user role: ADMIN
Value space: <Manual/Automatic/OnConnect/Hidden>
Manual: In manual mode (default value), the contents of the input source will not be presented on
the screen until you select it. Use either the remote control or the Touch screen control panel to
*
choose which input source to present.
* 1280 × 720 *
Automatic: In automatic mode, the content on the input source will be presented on screen
automatically. If more than one source is set to Automatic, the last connected source will be used.
1280 × 720
* *
If any content was active (presented) when the call was disconnected, the content will still be
displayed locally.
OnConnect: When in on-connect mode, the content on the input source will be presented on
screen when a cable is connected. Otherwise, the behavior is like when in manual mode.
Hidden: In hidden mode, the contents of the input source do not appear in the graphical user
interface.
Example: xConfiguration Video Input Source 1 PresentationSelection: Manual
70
API Reference Guide
xStatus Appendices
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.