Cisco TelePresence System Codec C40/C60
Contents
Introduction
xStatus Network 1 IPv4 DHCP TftpServerAddress
Returns the IP address of the TFTP server (provisioning server) as assigned by DHCP, provided that
the DHCP server supports option 150. This status is used only when xConfiguration Provisioning
Mode is CUCM.
Value space of the result returned:
<String>
Example:
xStatus Network 1 IPv4 DHCP TftpServerAddress
*s Network 1 IPv4 DHCP TftpServerAddress: "192.0.2.0"
** end
xStatus Network 1 IPv4 DHCP TmsServer
Returns the IP address of the TMS server (provisioning server) as assigned by DHCP, provided that
the DHCP server supports option 242. This status is used only when xConfiguration Provisioning
Mode is TMS.
Value space of the result returned:
<String>
Example:
xStatus Network 1 IPv4 DHCP TmsServer
*s Network 1 IPv4 DHCP TmsServer: "192.0.2.0"
** end
xStatus Network 1 IPv4 DHCP ProvisioningServer
Returns the IP address of the VCS provisioning server as assigned by DHCP, provided the
provisioning server address is defined as a vendor encapsulated option in the DHCP server. This
status is used only when xConfiguration Provisioning Mode is VCS.
Value space of the result returned:
<String>
Example:
xStatus Network 1 IPv4 DHCP ProvisioningServer
*s Network 1 IPv4 DHCP ProvisioningServer: "192.0.2.0"
** end
D14642.15 Codec C40-C60 API Reference Guide TC7.0, JANUARY 2014.
About the API
xConfiguration
xStatus Network 1 IPv4 DHCP ProvisioningDomain
xStatus Network 1 IPv4 DHCP TftpServer
xStatus Network 1 IPv6 Address
183
xCommand
Returns the SIP domain of the VCS provisioning server as assigned by DHCP, provided the
provisioning server address is defined as a vendor encapsulated option in the DHCP server. This
status is used only when xConfiguration Provisioning Mode is VCS.
Value space of the result returned:
<String>
Example:
xStatus Network 1 IPv4 DHCP ProvisioningDomain
*s Network 1 IPv4 DHCP ProvisioningDomain: "1234@company.com"
** end
Returns the IP address or DNS name of the TFTP server (provisioning server) as assigned by
DHCP, provided the DHCP server sets the option 66. This status is used only when xConfiguration
Provisioning Mode is CUCM.
Value space of the result returned:
<String>
Example:
xStatus Network
IPv4 DHCP TftpServer
*s Network 1 IPv4 DHCP TftpServerAddress: "192.0.2.0"
*s Network 1 IPv4 DHCP TftpServer: "1234@company.com"
** end
Shows the IPv6 address that uniquely identifies this system.
Value space of the result returned:
<String>
Example:
xStatus Network 1 IPv6 Address
*s Network 1 IPv6 Address: ""
** end
API Reference Guide
xStatus
xStatus
Appendices
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
Need help?
Do you have a question about the TelePresence System Codec C40 and is the answer not in the manual?
Questions and answers