Cisco TelePresence System Codec C40 Reference Manual page 102

Software version tc7.0
Hide thumbs Also See for TelePresence System Codec C40:
Table of Contents

Advertisement

Cisco TelePresence System Codec C40/C60
Contents
Introduction
xCommand CallHistory Recents
Retrieve aggregated information on previous calls made on the video system.
Filter: You can filter which calls to retrieve; either all, missed, placed or received calls.
Offset: Sets the call from which to start.
Limit: Defines the amount of calls in the output.
DetailLevel: Sets the level of detail for the information on these calls.
SearchString: Allows you to set the command to apply to a specified display name or call back
number.
CallHistoryId: CallHistoryId for the call in question.
Requires user role: USER
Parameters:
Filter(o): <All/Missed/Placed/Received/UnacknowledgedMissed>
Offset(o): <0..65534>
Limit(o): <0..65534>
DetailLevel(o): <Basic/Full>
SearchString(o): <S: 0, 255>
CallHistoryId(o): <0..65534>
Example:
xCommand CallHistory Recents Filter: Missed Offset: 6 DetailLevel: Full
*r CallHistoryRecentsResult ResultInfo Offset: 6
*r CallHistoryRecentsResult ResultInfo Limit: 65534
** end
D14642.15 Codec C40-C60 API Reference Guide TC7.0, JANUARY 2014.
About the API
xConfiguration
CallLog commands
xCommand CallLog Clear
xCommand CallLog Recent Delete
102
xCommand
xCommand
Clear call logs stored in the system. If a logtag is given as argument, that specific call is deleted
from the logs. If no logtag is given the system deletes all call logs. The LogTag values for the calls
are found by issuing the xHistory CallLog Call command.
Requires user role: USER
Parameters:
LogTag: <0..2147483647>
Example:
xCommand CallLog Clear
*r ClearResult (status=OK):
** end
Delete the call log of recent calls. If a logtag is given as argument, that specific call is deleted from
the log. If no logtag is given the system deletes all call logs. The LogTag values for recent calls are
found by issuing the xHistory CallLog Recent command.
Requires user role: USER
Parameters:
LogTag: <0..2147483647>
Example:
xCommand CallLog Recent Delete
*r DeleteResult (status=OK):
** end
API Reference Guide
xStatus
Appendices
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Telepresence codec c60

Table of Contents