Cisco TelePresence System Codec C40 Reference Manual page 193

Cisco TelePresence System Codec C40/C60
Contents Introduction
xStatus Security Persistency InternalLogging
Shows whether internal logging is set to persistent or non-persistent mode. Persistent is the default
mode.
Value space of the result returned:
<NonPersistent/Persistent>
Example:
xStatus Security Persistency InternalLogging
*s Security Persistency InternalLogging: Persistent
** end
xStatus Security Persistency LocalPhonebook
Shows whether local phone book is set to persistent or non-persistent mode. Persistent is the
default mode.
Value space of the result returned:
<NonPersistent/Persistent>
Example:
xStatus Security Persistency LocalPhonebook
*s Security Persistency LocalPhonebook: Persistent
** end
xStatus Security Persistency DHCP
Shows whether DHCP logging is set to persistent or non-persistent mode. Persistent is the default
mode.
Value space of the result returned:
<NonPersistent/Persistent>
Example:
xStatus Security Persistency DHCP
*s Security Persistency DHCP: Persistent
** end
D14642.15 Codec C40-C60 API Reference Guide TC7.0, JANUARY 2014.
About the API xConfiguration
xStatus Security Audit Server Port
193
xCommand
Returns information on which syslog server port the audit logs are configured to be sent to.
Value space of the result returned:
<Integer>
Example:
xStatus Security Audit Server Port
*s Security Audit Server Port: 514
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.