Cisco TelePresence System Codec C40 Reference Manual page 157

Cisco TelePresence System Codec C40/C60
Contents Introduction
Value space of the result returned:
<None/Downloading/Installing/Rebooting>
Example:
xStatus Camera 1 UpgradeStatus
*s Camera 1 UpgradeStatus: None
** end
xStatus Camera [n] DownloadProgress
Indicates how many percent of the new camera software upgrade has been downloaded. Result -1
indicates that the information is not available for that camera type.
Value space of the result returned:
<Integer>
Example:
xStatus Camera 1 DownloadProgress
*s Camera 1 DownloadProgress: 0
** end
D14642.15 Codec C40-C60 API Reference Guide TC7.0, JANUARY 2014.
About the API xConfiguration
Conference status
xStatus Conference
xStatus Conference Presentation Mode
xStatus Conference Presentation Protocol
xStatus Conference Presentation Resolution Height
157
xCommand
Shows the top level overview of the conference status. The identity of the Conference Site can only
be read during a call.
Shows the status of the secondary video stream.
Value space of the result returned:
<Off/Sending/Receiving>
Example:
xStatus Conference Presentation Mode
*s Conference Presentation Mode: Off
** end
Shows the video protocol used when transmitting the presentation.
Value space of the result returned:
<String>
Example:
xStatus Conference Presentation Protocol
*s Conference Presentation Protocol: "H264"
** end
Shows the height of the the presentation.
Value space of the result returned:
<0..3000>
Example:
xStatus Conference Presentation Resolution Height
*s Conference Presentation Resolution Height: 0
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.