Cisco TelePresence System Codec C40 Reference Manual page 68

Cisco TelePresence System Codec C40/C60
Contents Introduction
UserInterface configuration
xConfiguration UserInterface TouchPanel DefaultPanel
Define what (contact list, meeting list, or dial pad) the Touch screen control panel will display on
wake up.
Requires user role: USER
Value space: <None/LastUsed/ContactList/MeetingList/Dialpad>
None: None of the below options will appear as default on the Touch screen control panel.
LastUsed: The last used (contact list, meeting list, or dial pad) will appear as default on the Touch
screen control panel.
ContactList: The contact list (favorites, directory and history) will appear as default on the Touch
screen control panel.
MeetingList: The list of scheduled meetings will appear as default on the Touch screen control
panel.
DialPad: The dial pad will appear as default on the Touch screen control panel.
Example: xConfiguration UserInterface TouchPanel DefaultPanel: None
xConfiguration UserInterface UserPreferences
Some user preferences (ringtone, volume, language, date and time, etc) can be made available from
the Settings menu, or from the Settings > Administrator menu on the Touch screen control panel.
Accessing the Administrator menus requires that the user has admin privileges.
Requires user role: ADMIN
Value space: <Off/On>
Off: The user preferences are available from the Settings > Administrator menu on the Touch
screen control panel, for users with admin privileges.
On: The user preferences are available from the Settings menu on the Touch screen control panel.
Example: xConfiguration UserInterface UserPreferences: On
D14642.15 Codec C40-C60 API Reference Guide TC7.0, JANUARY 2014.
About the API xConfiguration xConfiguration
Video configuration
xConfiguration Video AllowWebSnapshots
xConfiguration Video CamCtrlPip CallSetup Mode
xConfiguration Video CamCtrlPip CallSetup Duration
68
xCommand
Allow or disallow snapshots being taken of the local input sources, remote sites and presentation
channel. If allowed, the web interface Call Control page will show snapshots both when idle and in
a call.
NOTE: This feature is disabled by default, and must be enabled from the on-screen menu, from a
directly connected Touch control panel, or via the codec's serial port (COM port).
Requires user role: ADMIN
Value space: <Off/On>
Off: Capturing web snapshots is not allowed.
On: Web snapshots can be captured and displayed on the web interface.
Example: xConfiguration Video AllowWebSnapshots: Off
This setting is used to switch on self-view for a short while when setting up a call. The Video
CamCtrlPip CallSetup Duration setting determines for how long it remains on. This applies when
self-view in general is switched off.
Requires user role: ADMIN
Value space: <Off/On>
Off: self-view is not shown automatically during call setup.
On: self-view is shown automatically during call setup.
Example: xConfiguration Video CamCtrlPip CallSetup Mode: Off
This setting only has an effect when the Video CamCtrlPip CallSetup Mode setting is switched On.
In this case, the number of seconds set here determines for how long self-view is shown before it is
automatically switched off.
Requires user role: ADMIN
Value space: <1..60>
Range: Choose for how long self-view remains on. The valid range is between 1 and 60 seconds.
Example: xConfiguration Video CamCtrlPip CallSetup Duration: 10
API Reference Guide
xStatus Appendices
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.