Cisco TelePresence System Codec C40 Reference Manual page 184

Software version tc7.0
Hide thumbs Also See for TelePresence System Codec C40:
Table of Contents

Advertisement

Cisco TelePresence System Codec C40/C60
Contents
Introduction
xStatus Network 1 IPv6 Gateway
Shows the address of the IPv6 gateway.
Value space of the result returned:
<String>
Example:
xStatus Network 1 IPv6 Gateway
*s Network 1 IPv6 Gateway: ""
** end
xStatus Network 1 MTU
Shows the MTU (Maximum Transmission Unit) size for the network.
Value space of the result returned:
<Integer>
Example:
xStatus Network 1 MTU
*s Network 1 MTU: 1500
** end
xStatus Network 1 VLAN Voice VlanId
The feedback shows the VLAN Voice ID; or Off if the VLAN Voice Mode is not enabled.
Value space of the result returned:
<"Off"/"1".."4094">
Example:
xStatus Network 1 VLAN Voice VlanId
*s Network 1 VLAN Voice VlanId: "Off"
** end
xStatus Network CDP Platform
Returns the hardware platform name of the switch connected to the endpoint.
Value space of the result returned:
<String>
Example:
xStatus Network CDP Platform
*s Network 1 CDP Platform: "cisco WS-C3750X-48P"
** end
D14642.15 Codec C40-C60 API Reference Guide TC7.0, JANUARY 2014.
About the API
xConfiguration
xStatus Network CDP Version
xStatus Network CDP Capabilities
xStatus Network CDP DeviceId
184
xCommand
Returns information about the software release version the switch is running.
Value space of the result returned:
<String>
Example:
xStatus Network CDP Version
*s Network 1 CDP Version: "Cisco IOS Software, C3750E Software (C3750E-
UNIVERSALK9-M), Version 15.0(1)SE2, RELEASE SOFTWARE (fc3)*Technical
Support: http://www.cisco.com/techsupport*Copyright (c) 1986-2011 by Cisco
Systems, Inc.*Compiled Thu 22-Dec-11 00:05 by prod _ rel _ team"
** end
Describes the functional capability for the switch in form of a device type. See documentation for
CDP protocol for more information.
Value space of the result returned:
<String>
Example:
xStatus Network CDP Capabilities
*s Network 1 CDP Capabilities: "0x0029"
** end
Identifies the name of the switch in form of a character string.
Value space of the result returned:
<String>
Example:
xStatus Network CDP DeviceId
*s Network 1 CDP DeviceId: "123456.company.com"
** end
API Reference Guide
xStatus
xStatus
Appendices
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Telepresence codec c60

Table of Contents