Cisco TelePresence System Codec C40 Reference Manual page 34

Cisco TelePresence System Codec C40/C60
Contents Introduction
xConfiguration Audio Volume
Set the speaker volume.
Requires user role: USER
Value space: <0..100>
Range: The value must be between 0 and 100. The values from 1 to 100 correspond to the range
from -34.5 dB to 15 dB (0.5 dB steps). The value 0 means that the audio is switched off.
Example: xConfiguration Audio Volume: 70
D14642.15 Codec C40-C60 API Reference Guide TC7.0, JANUARY 2014.
About the API xConfiguration xConfiguration
Cameras configuration
xConfiguration Cameras Camera [1..7] Backlight
xConfiguration Cameras Camera [1..7] Brightness Mode
xConfiguration Cameras Camera [1..7] Brightness Level
34
xCommand
This configuration turns backlight compensation on or off. Backlight compensation is useful when
there is much light behind the persons in the room. Without compensation the persons will easily
appear very dark to the far end.
Requires user role: ADMIN
Value space: <Off/On>
Off: Turn off the camera backlight compensation.
On: Turn on the camera backlight compensation.
Example: xConfiguration Cameras Camera 1 Backlight: Off
Set the camera brightness mode.
Requires user role: ADMIN
Value space: <Auto/Manual>
Auto: The camera brightness is automatically set by the system.
Manual: Enable manual control of the camera brightness. The brightness level is set using the
Cameras Camera Brightness Level setting.
Example: xConfiguration Cameras Camera 1 Brightness Mode: Auto
Set the brightness level. Requires the Camera Brightness Mode to be set to Manual.
Requires user role: ADMIN
Value space: <1..31>
Range: Select a value from 1 to 31.
Example: xConfiguration Cameras Camera 1 Brightness Level: 1
API Reference Guide
xStatus Appendices
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.