Cisco TelePresence System Codec C40 Reference Manual page 187

Cisco TelePresence System Codec C40/C60
Contents Introduction
Preset status
xStatus Preset
Shows the top level overview of the camera presets status.
xStatus Preset [1..15] Defined
Shows if a camera preset is stored at this position.
Value space of the result returned:
<True/False>
Example:
xStatus Preset 1 Defined
*s Preset 1 Defined: True
** end
xStatus Preset [1..15] Type
Shows the camera preset type.
Value space of the result returned:
<All/Camera>
Example:
xStatus Preset 1 Type
*s Preset 1 Type: All
** end
xStatus Preset [1..15] Description
Lists the configured name for the specific preset.
Value space of the result returned:
<String>
Example:
xStatus Preset 1 Description
*s Preset 1 Description: "Zoom in"
** end
D14642.15 Codec C40-C60 API Reference Guide TC7.0, JANUARY 2014.
About the API xConfiguration
Provisioning status
xStatus Provisioning
xStatus Provisioning Status
xStatus Provisioning Reason
187
xCommand
Shows the top level overview of the provisioning status.
Shows the status of the provisioning.
Failed: The provisioning failed.
AuthenticationFailed: The authentication failed.
Provisioned: The endpoint is provisioned.
Idle: The provisioning is not active.
NeedConfig: The endpoint needs to be configured.
ConfigError: An error occurred during configuration.
Value space of the result returned:
<Failed/AuthenticationFailed/Provisioned/Idle/NeedConfig/ConfigError>
Example:
xStatus Provisioning Status
*s Provisioning Status: Provisioned
** end
Shows the cause when provisioning has failed.
Value space of the result returned:
<String>
Example:
xStatus Provisioning Reason
*s Provisioning Reason: ""
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.