Adjustment For The Adjustable Fly Bar Machine - AMF Reece S-101 Installation Manual

S-101
ADJUSTMENTS FOR THE ADJUSTABLE FLY BAR MACHINE
To adjust for length of buttonhole - loosen thumbscrew
desired, and change cutting steel to conform.
Note:
The plungers and
out with nuts non rods
1-28
should enter the slots
.
e-mail: service@amfreece.cz; parts@amfreece.cz; website: www.amfreece.com
Phones: +420 582 309 146+ (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
and set gauge pointer to any graduation
To adjust length of fly bar - loosen screw
adjust with lever
to the front will eliminate the fly bar. Range of
adjustment is 0" to 7/8".
about 3/16" - to adjust this depth take up or let
- swinging the lever entirely
Revised 09/2004
and