Instruction For Installation On Reece Individual Tables - AMF Reece S-101 Installation Manual

S-101
INSTRUCTIONS FOR INSTALLATION ON REECE INDIVIDUAL TABLES
6"
1-2
Approx 1/4"
e-mail: service@amfreece.cz; parts@amfreece.cz; website: www.amfreece.com
Phones: +420 582 309 146+ (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
Parts and Belting for this installation are contained in
the accessory box which accompanies each machine.
1. Be certain that Motor Pulley
arrow. If not, motor rotation must be corrected before
operating machine.
2. Check with a plumb line to see that the heel of
Transmitter Pedal is 6" in back of front edge of the
table.
3. Place the Machine on the Table between the belt
slots and even with front edge of Table. Install crossed
Belt and open Belt . The rear leg of Belt
pass between the Idle Pulley
4. Adjust Machine sideways as necessary so that Belt
is central in its belt slot, and attach Machine to
Table with 4 wood screws.
5. Crank the Machine head to the rearmost point of its
travel and adjust Idle Pulley
approximately 1/4" clearance between Belt Guard
and the front leg of Belt
rotates in direction of
must
and Belt Guard .
, to provide
.
Revised 09/2004