MACHINE ADJUSTMENTS - CORRECTIVE AND MAINTENANCE
TO ADJUST THE TRIP LEVER
To equalize the ends of the stitching loosen nut
on stop screw
and screw in or out as required.
TO CORRECT DISTORTION OF EYE
Loosen nut
and move stud in slot of lever
TO ADJUST THE ROLL PRESSURE ON LENGTH
GAUGE
Crank the machine until it is in the stopping position, turn
the R.H. knurled stitch wheel until it is locked and wheel
will not turn further. When in this position roll
barely rest on gauge
Revised 09/2004
e-mail: service@amfreece.cz; parts@amfreece.cz ; website: www.amfreece.com
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
but be free to revolve.
Adjustment may be
made with screw
- depressing the
screw will lift the
roll - raising the
screw
the roll
until shape of eye is correct.
should just
will lower
S-101
1-17