Adjustments That Determine The Character Of The Buttonhole; Needle Information - AMF Reece S-101 Installation Manual

ADJUSTMENTS THAT DETERMINE THE CHARACTER OF THE BUTTONHOLE

NEEDLE INFORMATION

Needles for the series 101 machine are available in a wide range of sizes and types as listed on
sheet 30.
As a general rule it is desirable to use needles with the finest blade that the thread and material
will allow.
On cut before machines it is particularly important to use fine, round pointed needles in the
plain or spotted types.
On cut after machines for all average grades of fabrics, standard round point spotted or ball eye
needles are recommended.
Note:
For detailed needle information refer to sheet 30.
To adjust the length of buttonhole:
Loosen the set screw
for shorter buttonhole.
Note:
On Flybar Machines the same adjustment will lengthen or shorten the flybar or do away with the
bar entirely.
Revised 09/2004
e-mail: service@amfreece.cz; parts@amfreece.cz ; website: www.amfreece.com
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
Less
More
and pull gauge forward for longer buttonhole. Push lever to the rear
S-101
1-9