Powering The Camera From An Ac Outlet - Sharp VE-CG40U Operation Manual

Preparation
Powering the Camera
from an AC Outlet
You can power the camera from a power outlet
by using the supplied AC adapter.
Note:
• The supplied AC adapter is specially designed
for use with this camera, and should not be used
as a power supply for other equipment.
1
Make sure that the power is off.
2
Open the jack cover (see page 2).
3
Insert the DC plug into the DC IN jack
(1), then plug the AC adapter into a
power outlet (2).
DC IN jack
To AC outlet
DC plug
4
Press the Power button until the camera
turns on.
8
VE-CG40U-007-012
Notes:
• BEFORE REMOVING THE DC PLUG, ALWAYS
• Remove the DC plug from the camera if you will
• The AC adapter attaches directly, so use close
Jack cover
8
STOP OPERATIONS AND TURN THE POWER
OFF. Removing the DC plug during operation
may destroy the card, rendering it unreadable
and unwritable.
not use the camera for a long period of time.
to an outlet and be careful that it does not
detach.
02.8.27, 7:28 PM