Select Zones; Make The Announcement - Bosch Plena Voice Alarm System Installation And Operation Manual

Plena Voice Alarm System
7.3.1

Select zones

Select the zones to which the business call must be distributed with the zone selection
buttons on the call station or its keypads. A green LED indicates the zones to which the
business call is distributed.
–
–
NOTICE!
The zone selection buttons of the call stations and call station keypads must be configured
with the configuration software.
NOTICE!
See the Configuration Software Manual (9922 141 1038x) for more information about the
configuration software.
7.3.2

Make the announcement

Push the push-to-talk (PTT) button of the call station to make an announcement (see
Figure 7.7). The call is only distributed to the selected zones.
Figure 7.7 PTT button and indicators
The LEDs above the PTT button provide information about the status of the call station (see
Table 7.1).
Indicator
Yellow
Green
Red
Table 7.1 Call station status indicators
Bosch Security Systems B.V.
If the indicator of a button is off, the zone is not selected. Push the button to select the
zone.
If the indicator of a button is on, the zone is selected. Push the button to deselect the
zone.
Plena
Position
Left
Center
Right
Installation and Operation manual
Description
Busy
Talk
System in
emergency
state, call
station
disabled
Operation | en
9922 141 1037x (V2.16) | V0.6 | 2011.09
77