Table of Contents
Advertisement
Select Watch Tone (Cmd 62)
I can perform this command.
I cannot perform this command.
The Watch feature gives you the ability to watch points when the system is turned off. The system can be programmed to
alert you to opened doors and windows. For example, parents with small children may want a tone to sound whenever a
door is opened to monitor the children.
Use this command to set the type of response your system produces when a watch point is faulted. If you wish, you may tell
your system to display the identity of the point and sound a short tone whenever certain doors or windows are opened. See
Select Watch Points, to program which points in your system are to be watched.
1.
Ensure your system is off (On indicator is off).
2.
Press [CMD] [6] [2]. The command center may prompt you to enter a valid passcode.
3.
Enter your passcode if necessary. The command center displays the current watch tone.
4.
Select the type of watch tone (1 to 4) you want by pressing the appropriate number key.
Watch Tone
Off
Short Beep
Beep Till Key
Beep Till Closed
If you just want to review (not change) the current watch tone setting, press [CMD] to exit this function.
5.
After making your selection, the display confirms the choice you made.
6.
Press [CMD] to exit this feature.
Select Watch Points (Cmd 63)
I can perform this command.
I cannot perform this command.
Once you decide how your system responds to watched points (see Select Watch Tone), you need to decide which of the
points in your system are "watched".
Use this command to tell your system which points to watch. You cannot watch 24-hour and 24-hour fire points.
Choosing which points to watch depends upon your security objective. If you have small children, you may choose to watch
points of entry and exit. Each time a watch point is faulted (door or window is opened), the command center responds as
programmed.
1.
Ensure your system is off (On indicator is off).
2.
Press [CMD] [6] [3]. Enter your passcode if necessary. The command center displays all points that are
currently being watched (Watch On) and those that are not (Watch Off), followed by instructions for
changing the current setting.
3.
Press [0] [*] to turn Off all points. Press the appropriate number key (non-24-hour points) followed by [*]
for individual points.
The display continues to scroll the remaining points. You may continue to program as many Watch Points as
are available.
4.
When you are finished, press [CMD] to return exit this command.
© 2003 Bosch Security Systems
Key
Description
[1]
Displays point identity, but sounds no tone when points are faulted.
[2]
Displays point identity and sounds a short tone when point are faulted.
[3]
Displays point identity and sounds a tone until the [CMD] key is pressed.
Displays point identity and sounds a tone until the point is returned to normal
[4]
(door or window is closed). Pressing the [CMD] key also silences the tone.
D623/D625 User Guide
Page 31
Security System
User Guide
46841D
Advertisement
Table of Contents
