Background Music; Select Bgm Source; Select Zones - Bosch Plena Operating Manual

88 en | Operation
–
7.2

Background music

The background music (BGM) is controlled using the BGM controls on the front of the voice
alarm controller, voice alarm router and their remote control and remote control extensions.
Proceed as follows to route BGM:
1.
2.
7.2.1

Select BGM source

Select the BGM source with the Select button on the front of the voice alarm controller. A
green LED indicates the source that is selected.
–
–
Figure 7.3: BGM source selector
7.2.2

Select zones

The BGM is distributed to the zones with the Zone select buttons on the voice alarm
controller, voice alarm router, remote controls and remote control extensions. A green LED
indicates the zones to which BGM is distributed.
–
–
Figure 7.4: BGM zone selector
2013.07 | V2.0 |
After the settings of the connected loudspeakers have been changed.
Select the BGM source (see section Select BGM source, page 88).
Select the zones (see section Select zones, page 88).
If the source is a CD player or a tuner that is connected to the CD/Tuner input, choose
CD/Tuner.
If the source is an auxiliary source that is connected to the Aux input, choose Aux.
Select Zone select
CD/Tuner Aux
- +
0
- +
If the Zone select indicator is off, no BGM is distributed to the zone. Push the Zone select
button to distribute the BGM to the zone.
If the Zone select indicator is on, BGM is distributed to the zone. Push the Zone select
button to stop distributing the BGM to the zone.
Select Zone select
CD/Tuner Aux
+
-
+ 0
-
Installation and Operation manual
Plena
Bosch Security Systems B.V.